The PR300 EVO belongs to ATOLL’s “Evolution” range of preamplifiers. It has a wide range of combinations with considerable improvements.
- 8 mm brushed, micro-blasted and anodized aluminum front panel, high-precision engraving.
- 1.5 mm steel chassis.
- Two 10 VA toroidal transformers each for the audio stages.
- A 3.2 VA linear transformer (digital audio).
- A 5 VA low-consumption transformer (control logic).
- High-quality and shielded MKP link capacitors.
- Integral dual mono and symmetrical structure:
– Two independent symmetrical stages for each channel.
– One stereo attenuator per channel (with switched resistors).
- Audio stages with bipolar transistors with perfectly symmetrical structure, polarized in class A, very low feedback rate.
- Precise balance adjustment, possibility of memorizing it.
- Possibility of renaming the inputs.
- Possibility of choosing the standby mode: Low consumption or preheating.
- High-contrast OLED display (on or off mode after 5 seconds of inactivity).
- ATOLL global remote control supplied as standard.
- The PR300 EVO is compatible with DA100 and DA200 boards (optional):
– DA100 and DA200.
– P50 and P100.
CONNECTIVITY
Inputs
1 XLR input.
5 Line inputs: AUX or PHONO (option) CD, TUNER, DVD, TAPE.
1 BY-PASS input.
Outputs
2 Line outputs.
1 XLR output.
1 12V Trigger output.
Possibility of adding the DA200 digital board (optional):
- 2 Optical inputs (24 bits/192 kHz).
- 2 Coaxial inputs (24 bits/192 kHz).
- 1 Asynchronous USB input (24 bits/384 kHz) & DSD (up to 256).
- 1 Bluetooth input.
TECHNICAL DATA
Power supply: 2×10 VA (audio) + 10 VA + 3,2 VA
Total of capacitors: 89 000 µF
Bandwidth (-3 dB): 5 Hz – 100 kHz
Rise time: 1,3 µs
Input impedance: 357 kΩ
Sensitivity: 3 V
Signal-to-noise ratio: 100 dB
Distortion rate at 1 kHz: 0,005%
Standby power consumption (low power): < 0,5 W
Dimensions: 440×365×95 mm
Weight: 6,8 Kg
PR300 EVO DOCUMENTS
OPTIONAL BOARDS AVAILABLE
- Integrated audio converter: AKM-AK4490:
Signal/Noise: 120 dB; dynamic: 120 dB.
DSD: 2,8 MHz and 5,6 MHz. - 16-bit to 32-bit PCM stream up to 384 kHz on USB-B input (asynchronous).
- Up to 24-bit 192 kHz on coaxial and optical inputs.
- USB interface: XMOS XUF208 with a program specifically developed for ATOLL.
Phono boards on the AUX input (choice):
- P100 (configurable MM or MC).
- P50 (MM).
XMOS SPECIFIC DRIVER
Important: Using the USB input of the DAC card requires downloading a specific driver for Windows computers. This can be downloaded below. This driver is not necessary under MAC and Linux.
Download it here:
INTERFACES
- Balance management.
- Low power OLED display.
- Standard remote control (allowing control of all products: Integrated, CD players, Tuner, DAC).
The PR300 EVO is available in black or natural aluminum version:
