The integrated amp-preamp IN200 Evolution is manufactured with the greatest care: we choose the best possible components to achieve the highest level of sound performance. This rigorous search for perfection goes through the design of proprietary ATOLL circuits in order to preserve the integrity of the most subtle musical signals.
- 8 mm brushed, micro-blasted and anodized aluminium front panel, high-precision engraving.
- 1.5 mm steel chassis.
- Two 340 VA toroidal transformers for the audio stages plus 10 VA for the digital stages.
- High-quality and shielded MKP coupling capacitors.
- Bipolar transistor and
- LED current sources to ensure perfect voltage stability.
- New tellurium copper speaker outputs.
- Possibility of choosing standby mode: Low consumption or preheating.
- Precise adjustment of the balance, possibility to memorize it.
- Double-sided printed circuits with nickel/gold finish.
- Possibility to rename the inputs.
- High-contrast OLED display (on or off mode after 5 seconds of inactivity).
- ATOLL global remote control supplied as standard.
- The IN200 EVO is compatible with the DA100 and DA200 boards (optional).
CONNECTIVITY
Inputs
5 Audio inputs (RCA): AUX (or optional P50 / P100 phono stage), CD, TUNER, DVD, TAPE (IN + OUT).
1 BY-PASS input (used as a power amplifier).
Outputs
2 Line preamp outputs (for bi-amplification or to connect a subwoofer).
1 Trigger output (12V).
Various
1 Headphone jack Ø 6,35 mm.
Internal wiring of loudspeaker outputs with the specific audio cable.
Gold-plated (RCA) connectors.
Our balanced MOS-FET amplifier circuits offer excellent harmonic gradients and have no memory effect, every moment, the current is immediately delivered to your speakers. This is one of the secrets of the musicality that ATOLL amplifiers enjoy.
TECHNICAL DATA
Power in Wrms/channel/8Ω (230v): 120 W
Power in Wrms/channel/4Ω (230v): 200 W
Power supply: 2×340 VA + 10 VA
Total capacitive: 59,220 µF
Number of inputs: 5+1 BY-PASS
Power consumption with switch off: 0 W
Power consumption in standby (low consumption): <0.5 W
Power consumption in preheating mode: 18 W
Power consumption in operation: 19 W – 600 W
Input impedance: 220 kΩ
Maximum input level: 3.5 Vrms
Sensitivity: 350 mV
Signal/noise ratio: 100 dB
Distortion at 1 kHz: 0.05% / (10 W)
Bandwidth: 5 Hz – 100 kHz
Rise time: 2.5 µs
Dimensions: 440×309×95 mm
Weight: 12 Kg
IN200 EVO DOCUMENTS
(The back panel is the same as the IN200 Sig).
OPTIONAL BOARDS AVAILABLE
1 Phono board on the AUX input (optional):
- P100 (configurable MM or MC).
- P50 (MM).
———————————
1 Digital board (of your choice):
- DA200
2 Coaxial inputs (24 bits/192 kHz)
2 Optical inputs (24 bits/192 kHz).
1 Bluetooth receiver.
1 USB-B input: PCM & DSD. - DA100
2 Coaxial inputs (24 bits/192 kHz).
2 Optical inputs (24 bits/192 kHz).
XMOS SPECIFIC DRIVER
Important: Using the USB input of the optional DAC board requires downloading a specific driver for Windows computers. This can be downloaded below. This driver is not necessary under MAC and Linux.
Download it here:
Serial remote control (allowing control of all products: Integrated, CD Players, Tuner, DAC).
“Atoll is one of the electronics manufacturers where we appreciate transparency, which means neutrality, liveliness, and self-effacement in the face of music. With the IN200 Signature, the design is mature, especially when listening to it. No signature of its own, no tonal redundancy from one track to another, but a unique and distinct reading of each score, with now class-A flavours found throughout the entire spectrum and over a wide range of listening levels.”
Dominic Marchand, Haute Fidélité magazine, No. 231, May 2018
The IN200 EVO is available in black or natural aluminium versions:
